Build your Own home Cinema
Home theaters are no longer only an extravagance for the rich and famous. Thanks to more affordable technology, many families are enjoying a true movie theater experience without leaving home. If you're thinking about building a home theater, let HGTV walk you through the steps.
Step 1: Choose a Location
The ideal space for a home theater is 20 feet long by 13 feet wide and relatively isolated from the rest of the house. "It has to be in a place that does not interrupt the business of the home, " says Rob Rickel, president of RSR Custom Renovations and Additions. "You don't want the sound disturbing everyone."
- Building a theater wing off the family room
- Closing in the open second-story space above a formal living room
- Converting a spare bedroom that's at least 12 by 12 feet
Building Home Theater Shell
Building the shell of a home theater is similar to building any other addition to your home – with one exception. You'll want to pay special attention to insulation. A rating of R30 is standard for the floor, ceiling, and exterior wall insulation, but don't neglect the interior walls. Loosely packed R11 can help keep the sound of movie explosions from rocking the rest of your home. It won't block the noise completely, though. You'll need to add additional sound barriers after you pre-wire the room.
Pink Insulation in Walls
Step 3: Pre-Wire Surround Sound
Most home theaters use a 7.1 surround sound system. This includes one subwoofer and seven channel speakers – left, right, center, two side surrounds, and two rear surrounds. To pre-wire a 7.1 system, follow these steps:
Mark the location where each speaker will go:
- Center – just above or below the viewing screen
- Left/Right – on either side of the screen at ear height
- Side Surrounds – on the side walls just behind the main row of seating
- Rear Surrounds – on the back wall (how far apart depends on the system)
Choose a spot for the hub that will house your receiver and other A/V equipment. The hub can be hidden in a cabinet inside the theater or in a closet nearby.
Run audio cables from the hub to each speaker location. Cables should be at least 16-4 (16-gauge, four conductors) for side and rear speakers. Use stronger 12 or 14-gauge cables for left, right, and center speakers.
Some home theaters now use 9.1 surround sound, says Michael Fox of Cinema Sound. This adds another set of speakers in the front of the room. "If there's a helicopter flying overhead (in the movie), you'll hear that sound from those top speakers, " Fox says.
Step 4: Pre-Wire a Video Projector
For a realistic, large-screen theater experience, you'll need to pre-wire a projector system. This involves just two cables:
- An HDMI cable to carry high-definition video to the projector
- A CAT5 control wire for accessing the projector with a radiofrequency (RF) remote.
This will let you start your movies without pointing at the projector.
One end of these cables should extend from the ceiling at the rear of the theater, where the projector will hang. The other end should connect to your equipment hub. Be sure to pre-wire the hub with your cable or satellite feed, as well as high-speed Internet for streaming video.
Step 5: Pre-Wire Lighting
Appropriate lighting is essential for creating a movie theater atmosphere. This includes recessed lighting in the ceiling and sconces along the side walls. Run basic electrical wiring to each of these locations. Connecting the lights to an RF dimmer will let you control them with the same RF remote you use for the projector. You can even set the lights to auto-dim when you press play.
Home Theater Lighting Wiring
Home Theater Decor and Sconces
If you plan to have stadium seating, you'll also need floor lighting along the steps. One option is to pre-wire low-voltage lighting that can be left on all the time.
